Narrowboat 25ft Project
- Barco REF# · 154332
- Eslora total · 7.75m
- Año ·
- Construcción · Acero
- Perfíl de carena · Desplazamiento
- Motor · 1 x gasoil 0cv, Unknown ()
- Lugar · Stroud
Este barco está fuera del mercado Aqui hay algunas embarcaciones que siguen en venta
Detalles suplementarios
| Astillero | Unknown |
|---|---|
| Lugar | Stroud |
| Capacidad de carburante | 90.0 ltr (19.8 G) Total - 1 Tanks |
| Capacidad de agua | 300.0 ltr (66.0 G) Total - 1 Tanks |
Sistemas Mecánicos
| Motor | 1 x gasoil 0cv |
|---|---|
| Marca del motor y el modelo | Unknown () |
| Horas de motor | Desconocido |
| Motor refrigerado por | Indirect |
| Gobierno | caña |
| Propulsión | Eje/s |
| Helice(s) | 3 blade |
| Consumo de carburante | Desconocido |
| Velocidad de crucero | 4 nudos |
| Velocidad máxima | 5 nudos |
Dumper truck type tw cylinder diesel engine which runs well.
Engine control and electrical switchboard in place
Dimensiones
| Eslora total | 7.75m |
|---|---|
| Manga | 2.08m |
| Calado mín. | 0.50m |
| Desplazamiento | 4,988kg (10,998.5lbs) |
| Altura interior | 1.85m |
| Ubicación/Lugar | A tierra |
Construcción
| Construction | Acero |
|---|---|
| Perfíl de carena | Desplazamiento |
| Acabado | Brea acabado |
Hull has been blacked 2012
Topsides will be cleaned and primed prior to sale
Single glazed windows are included and ready to be installed
Interiores
| Camarote(s) | 2 |
|---|
Partially lined in ply with electrical and water system in place.
Partially built shower room with shower tray in place
Interiores
| Sistema de agua bajo presión |
|---|
Partially lined in ply with electrical and water system in place.
Partially built shower room with shower tray in place
Equipo de cubierta
| Cabos | |
|---|---|
| Defensas |
1 Anclas
(Spade)
5.00m de cadena
10.00m de cabo
Equipo de seguridad
1 Bombas de achique (0 manual / 1 eléctrico)
Comentario del broker
This is a stalled project as the owner is unable to complete for health reasons. She will make a nice little weekend style narrow boat and with the engine installed already represents a great opportunity.
The vessel can be completed in the covered workshop where she is if required at a cost of circa £50 per month and all parts needed to complete can be sourced via the vendor if desired.
These boat details are subject to contract.
Note: Offers on the asking price may be considered.